Replacing The Oxygen Tank; Malfunctions And Maintenance; Accessories - Rothenberger ROXY-KIT PLUS Bedienungsanleitung

Replacing the oxygen tank

 Close the oxygen tank valve by turning it rightward.
 Screw off the oxygen pressure regulator by turning it counter-clockwise with the enclosed
key.
 Remove the oxygen tank from the mounting. Replace the empty oxygen tank with a full
one.
 Screw the oxygen pressure regulator clockwise onto the oxygen tank.
 Make sure that the gasket in the oxygen pressure regulator is present and intact.
 In so doing, make sure that the connections are free of oil and grease.
6

Malfunctions and maintenance

Problem
The flame turns yellow.
The flame gets smaller or
lifts off the burner.
Regularly check the hoses for cuts and leaks (visual inspection).
Replace the hose package with its single-tank fuse if the single-tank fuse has triggered after a
flashback.
Hoses become porous with time. Therefore, replace the hose package as soon as small cuts
appear on the hoses.
7

Accessories

Name of the accessory
Nozzle mixing tube + Nut f. ROXY handle
Securitiy-Potlighter
ROXY Micro nozzle adapter M14x1
Welding nozzle ROXY 1,2 mm
Welding nozzle ROXY 1,5 mm
Welding nozzle ROXY 2,0 mm
Burnerkey
Nylon- safety goggles, A5
Gas regulating valve
Oxygen disposable steel cylinder, 110 bar, 1L
Cause
Either the oxygen tank
valve is closed or the
oxygen tank is empty.
Either the gas cartridge
valve is closed, or isn't
open wide enough, or the
gas cartridge is empty.
ENGLISH
Solution
Open the oxygen tank valve.
Replace the empty oxygen tank
with a full one.
Open the gas cartridge valve by
turning it (farther) left, or replace
the gas cartridge. If you can still
hear liquid noises when you
shake the gas cartridge, the
ambient temperature is too low
for the gas to come out in gase-
ous form (below -20°C).
ROTHENBERGER-Item number
35587
32077
35585
35588
35422
35423
35530
35621
35723
35750
15