Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. Ordering information

N2400-0001
N2400-1008
N2400-1001
N2400-1002
N2400-1003
N2400-1004
N2400-1005
N2400-1006
NOTE: Do not exceed a speed of 800 rpm when the microtiter foam attachment (N2400-1004) is being used. High speeds may cause
sample spillage. Do not exceed a speed of 1200 rpm when all other foam attachments are being used. Only the cup head (N2400-
1008) supplied with the unit should be used up to the maximum speed of 3000 rpm.
Please see our website www.starlabgroup.com for information on our wide range of consumables
including centrifuge tubes, microcentrifuge tubes and PCR tubes.
7. Warranty
The Vortex IR is under warranty against defects in materials and workmanship under normal service, for
two years from the shipping date to the purchaser. This warranty excludes damages resulting from trans-
port, misuse, carelessness, or neglect. STARLAB's liability under the warranty is limited to the receipt of
reasonable proof from the customer that the defect is embraced within the terms of the warranty. All claims
made under this warranty must be presented to STARLAB or a STARLAB Distributor within two years
following the date of delivery of the product. Our "General terms and conditions" apply.
Vortex IR
Replacement Cup for Single Test Tube
Vortex IR Foam Attachment for 19 x 1.5 ml Microcentrifuge Tubes
Vortex IR Foam Attachment for 5 x 50 ml Tubes (or any tube up to 16 mm Ø)
Vortex IR Foam Attachment for 4 x 15 ml Tubes (or any tube up to 29 mm Ø)
Vortex IR Foam Attachment for Microtitre Plate
Vortex IR Universal Foam Attachment (50 mm Ø)
Vortex IR Customisable Soft Foam Attachment (29 mm Ø)
Vortex IR
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis