Disposal; Removing The Battery - Kärcher BR 35/12 C Bp Betriebsanleitung

Note:
Thanks to the perforation pattern the vacu-
um lips cannot be mixed up. They cannot
be turned and reinstalled.
 Replace vacuum lips.
 Insert the holder with the vacuum lips
into the vacuum bar and snap into
place.
Replacing the brush roller
Warning
Risk of crushing due to the parking stand
folding up during the brush replacement.
Turn the steering wheel by 90° to the left
prior to the brush replacement.
 Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
 Place the new brush roller on the driver
and lock into place on the opposite side.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
22

Removing the battery

Danger
The removal of the battery may only be per-
formed by the Kärcher aftersales service or
a specialist.
The evaluation, whether the battery is dam-
aged or not, is done by an authorised after-
sales technician
The Chapter "Safety instructions" for han-
dling accumulators must be observed un-
conditionally.
1 Screw
2 Cover
 Unscrew 2 screws.
 Swivel the lid downwards.
 Loosen and remove the battery plug.
 Remove the battery.
 Dispose of used battery in accordance
with the applicable provisions.
– 8
EN

Disposal