Protecting The Environment - Berner BCLL TOP Bedienungsanleitung

EN G LI S H
THE DETECTOR GIVES OFF A TONE BUT THE LCD DISPLAY WINDOW DOES NOT
FUNCTION
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the detector
to a Berner service centre.
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS "ON-GRADE"
SIGNAL
• In the presence of very intense ambient light, the detector may give
a false or erratic indication of level.
• Reposition the detector out of the intense light or shade the sensor
window (u) to resume normal operation.
Optional Accessories
Using the Laser with Accessories (fi g. 1 inset)
The laser is equipped with a 1/4" x 20 female thread (i) on the bottom
of the unit. This thread is to accommodate current or future Berner
recommended accessories. Only use Berner accessories specified for
use with this product. Follow the directions included with the accessory.
Consult your Berner Partner for further information on the appropriate
accessories.

Protecting the Environment

Separate collection. This product must not be disposed of
with normal household waste.
Should you find one day that your Berner product needs replacement,
or if it is of no further use to you, do not dispose of it with household
waste. Make this product available for separate collection.
72