Berner BCLL TOP Bedienungsanleitung Seite 72

EN G LI S H
Above Slightly Above
Grade Grade
fast fast
beep beep
4. Use the marking notches (p) to accurately mark the position of the
laser beam.
MOUNTING ON A GRADE ROD (FIG. 9, 10)
1. To secure your detector to a grade rod, first attach the detector to
the clamp by pushing in on the clamp latch (v). Slide the tracks (w)
on the clamp around the rail (x) on the detector until the latch (y) on
the clamp pops into the latch hole (z) on the detector.
2. Open the jaws of the clamp by turning the clamp knob (a1)
counterclockwise.
3. Position the detector at the height needed and turn the clamp
knob clockwise to secure the clamp on the rod.
4. To make adjustments in height, slightly loosen the clamp, reposition
and retighten.
Detector Cleaning and Storage
• Dirt and grease may be removed from the exterior of the
detector using a cloth or soft, non-metallic brush.
70
INDICATORS
On Slightly Below
Grade Grade
steady slow
tone beep
Below
Grade
slow
beep