Berner BCLL TOP Bedienungsanleitung Seite 73

• The Berner digital laser detector is rain resistant but not immersible.
Do not pour water on the unit or submerge it under water.
• The best storage place is one that is cool and dry—away from
direct sunlight and excess heat or cold.
Detector Service
Except for batteries, there are no user serviceable parts in the Digital
Laser Detector. Do not disassemble the unit. Unauthorised tampering
with the laser detector will void all warranties.
Detector Troubleshooting
THE DETECTOR WILL NOT TURN ON
• Press and release the power button.
• Check to see that the battery is in place and in the proper
position.
• If the detector is very cold, allow it to warm up in a heated area.
• Replace the 9-volt battery. Turn the unit on.
• If the detector still does not turn on, take the detector to a Berner
service centre.
THE DETECTOR'S SPEAKER MAKES NO SOUND
• Ensure that the detector is on.
• Press the volume button. It will toggle on and off.
• Ensure that the laser is turned on and that it is emitting a laser
beam.
• If the detector is still not making any sound, take it to a Berner
service centre.
THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER LASER
UNIT
• The Berner Digital Laser Detector has been designed to work
only with the BCLL BASIC and the BCLL TOP and certain other
compatible line lasers.
E NGLI SH
71