Assembly And Adjustment; Unpacking - Berner BCLL TOP Bedienungsanleitung

1 Kitbox
1 Instruction manual
1 Strip of security labels
• Take the time to thoroughly read and understand this manual prior
to operation.

ASSEMBLY AND ADJUSTMENT

WARNING! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.

Unpacking

FITTING THE WARNING LABEL
The safety warnings on the label shown on the laser must be
formulated in the language of the user.
For that purpose, a separate sheet of self-adhesive labels has been
supplied with the tool.
WARNING: Check that the safety warnings on the label
have been formulated in your language.
The warnings should read as follows:
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
• If the warnings are in a foreign language, proceed as follows:
– Remove the required label from the sheet.
– Carefully place the label over the existing label.
– Press the label in place.
E NGLI SH
59