Intended Use; Possible Misuse; Items Supplied; Technical Data - Hilti WSC 85 Original Bedienungsanleitung

▶ Always use the riving knife except when plunge cutting. Reinstall the riving knife as soon as you have
finished the plunge cut. The riving knife interferes with plunge cutting and can cause kickback.
▶ The riving knife is effective only when it is in the kerf in the workpiece. The riving knife is ineffective
for short cuts and cannot help prevent kickback in this situation.
▶ Do not operate the saw if the riving knife is bent. Even slight interference can slow the closing
movement of the guard.
3 Description
3.1 Overview of the product
Sawdust ejection
@
On/off switch
;
Cutting angle scale
=
Clamping screw for blade angle adjustment
%
Clamping screw for rip fence
&
Cutting line indicator
(
Cutting depth scale
)
Pivoting guard
+
Rip fence (parallel guide)
§
Riving knife
/
Securing screws for riving knife
:

3.2 Intended use

The product described is a circular saw. It is designed for cutting wood or wood-like materials, plastics,
gypsum plasterboard, gypsum fiberboard and composite materials, up to a cutting depth of 85 mm (3.35 in).
The circular saw is equipped with a removable connector for an optional vacuum cleaner / dust removal
hose. This connector is designed to fit standard suction hoses. In order to connect the vacuum cleaner hose
to the saw, use of a suitable adapter may be necessary.

3.2.1 Possible misuse

The use of saw blades that do not comply with the specifications given in the technical data or the use of
cutting and grinding discs or blades made from high-alloy steel (HSS steel) is not permissible. Sawing metals
is not permissible.

3.3 Items supplied

Circular saw, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.group

4 Technical data

4.1 Technical data
Note
For details of the rated voltage, frequency, current and input power, refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
14 English
Printed: 07.09.2017 | Doc-Nr: PUB / 5071332 / 000 / 04
1
·
$
£
|
¡
Q
W
E
R
T
Switch-on interlock release button
Suction adapter
Clamping screw for rip fence
Lock for cutting depth
Base plate
Drive spindle lock button
Air vents
Hexagon socket wrench
Auxiliary grip
Adjusting lever for cutting depth