Product Overview; Intended Use - Hilti NURON SC 5ML-22 Original Bedienungsanleitung

▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 31
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3 Description
3.1

Product overview

3.2

Intended use

The product described is a cordless circular saw. It is designed for cutting metal or materials similar to metal.
Use only saw blades approved for the product that comply with the specifications set out in the technical
data (e.g. diameter, speed of rotation, thickness, material, etc...). Grinding and cut-off wheels and saw
24 English
1
Auxiliary grip
@
Switch-on interlock
;
On/off switch
=
Grip
%
Battery release button
&
Battery status indicator
(
Battery
)
Chip collector
+
Pivoting guard operating lever
§
Arbor
/
Base plate
:
Pivoting guard
∙
Direction-of-rotation arrow
$
Fence
£
Cutting line indicator
|
LED / viewing window
¡
Guard
Q
Spindle lock button
W
Clamp for fence
E
Hex key
R
Clamping lever for cutting depth adjustment
T
Mounting flange
Z
Clamping flange
U
Clamping screw
I
2276609
*2276609*