Before Use - Hilti SC 70W-A Bedienungsanleitung

Power tool
Cutting depth with scale setting
Speed under no load
NOTE
The sound pressure and vibration values given in these instructions have been measured in accordance with a
standardized test and may be used to compare one electric tool with another. They may be used for a preliminary
assessment of exposure. The data given represents the main applications of the electric tool. However, if the electric
tool is used for different applications, with different accessories or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period. An accurate estimation of exposure should also take into
account the times when the tool is switched off, or when it is running but not actually being used for a job. This may
significantly reduce exposure over the total working period. Identify additional safety measures to protect the operator
from the effects of noise and/or vibration, for example: maintain the electric tool and accessories, keep the hands
warm, organisation of work patterns.
Noise and vibration information for the SC 70W-A22 (measured in accordance with EN 60745-2-5):
Typical A-weighted sound power level, L
Typical A-weighted emission sound pressure level., L
Uncertainty for the given sound level, K
Triaxial vibration values (vibration vector sum)
Sawing in wood, a
hW
Uncertainty (K)
Battery
Rated voltage
Capacity
Weight

6 Before use

NOTE
The system switches itself off automatically when the
battery voltage is low.
NOTE
Read the operating instructions for the charger for further
information about the charging procedure.
6.1 Inserting the battery 3
CAUTION
Check that the power tool is switched off and the
switch interlock activated before fitting the battery.
CAUTION
Before inserting the battery in the power tool, check
to ensure that the battery terminals and the contacts
in the power tool are free from foreign objects.
All manuals and user guides at all-guides.com
WA
B 22/5.2 Li‑Ion (01)
21.6 V
5.2 Ah
0.78 kg
SC 70W‑A22
Bracket 0°: 70 mm
Bracket 45°: 51 mm
Bracket 50°: 45 mm
3,500/min
92 dB (A)
81 dB (A)
pA
3 dB (A)
1.3 m/s²
1.5 m/s²
B 22/3.3 Li‑Ion
21.6 V
3.3 Ah
0.78 kg
CAUTION
A falling battery may present a risk of injury to yourself
and others.
NOTE
Check that the battery is securely seated in the tool.
6.2 Removing the battery from the power tool 4
6.3 Transport and storage of batteries
CAUTION
Fire hazard. Never transport batteries in loose, bulk form.
There is a risk of short circuiting.
Pull the battery out of the locked position (working posi-
tion) and move it into the first latching position (transport
position).
Observe national and international transport regulations
when shipping batteries (transportation by road, rail, sea
or air).
B 22/2.6 Li‑Ion (02)
21.6 V
2.6 Ah
0.48 kg
19
en