Features Of The Amplifier And Control Sections - dB Technologies SUB 618 Bedienungsanleitung

English

FEATURES OF THE AMPLIFIER AND CONTROL SECTIONS

Class D digital custom amplifier, SMPS, is at the heart
of SUB 615 and SUB 618.
The system is silent and is controlled by a dedicated
DSP that manages the different parameters.
The sound amplification power is 600 W RMS.
The amplifier panel is made up of:
• Input, Output and Control Section
• Power Supply Unit Section
WARNING
• Never attempt to disassemble the
amplifier in any way.
• In case of overheating, the audio
volume is gradually reduced until
module thermal stabilization. The
level is autotically restored when
the correct operating temperature
is reached.
• In the event of a malfunction,
immediately cut power supply
off, by disconnecting the module
from the mains, and contact an
authorised repair centre.
WARNING
• Never remove the front grille
protecting the product. To
prevent electric shock, in case of
protection grille accidental damage
or replacement (to be carried
out at the after-sales service),
immediately disconnect power
supply. Never connect mains power
supply when the grille is removed.
SUB615 - SUB618
!
!
Cod. 420120251 REV. 1.0
23