3.3.2
EtherCAT ECAT Out / ECAT In
The electrical connection is to be made by means of suitable cables considering
EMI demands and according to the pin description shown below:
Incorrect connection or inadmissible supply voltage can damage
the transducer.
Connector
2x M12, D coded, 4pin, female
Pin 1:
Tx+ / Transmit Data +
Pin 2:
Rx+ / Receive Data +
Pin 3:
Tx- / Transmit Data -
Pin 4:
Rx+ / Receive Data -
29
VSPE-de-171117