Programming A Bid Chip / Key; Menu Structure, Programming Procedure - ROBBE Power Peak QUAD EQ-BID Bedienungsanleitung

8. PROGRAMMING A BID chIP / KEy

Connect
the Chip
Disconnect
the Chip

8.1 MENU STRUcTURE, PROGRAMMING PROcEDURE

+/-
Button
'ENTER'-
Button
+/-
Button
+/-
Button
+/-
Button
Operating Instructions
Power Peak ® Quad EQ-BID
As soon as a BID chip/key is connected to the
charger, the charger switches to the mode for pro-
gramming a BID chip/key. The same applies if the
charger isswitched on with a chip connected.
All parameters for the battery, for which this chip
is to be used, can be set from this start menu. In
addition, stored charge or discharge values can be
read (see Section 8.3). on removing a BID chip/key,
the programming menu is exited and reverts to the
start display.
'ENTER'-
Button
'ENTER'-
Button
'ENTER'-
Button
+/-
Button
+/-
Button
+/-
Button
16
Order No.
8565
'ENTER'-
Button
'ENTER'-
Button
'ENTER'-
Button