Dimensions, Weights; Update Rate And Clock Frequency - Balluff BTL7-P511-M serie Betriebsanleitung

BTL7-P511-M _ _ _ _ -A/B/Y/Z(8)-S32/S115/S135/KA _ _ /FA _ _
Micropulse Transducer - Rod Style
7
Technical data (continued)
7.5

Dimensions, weights

Rod diameter 8 mm or 10.2 mm
Nominal length
For Ø 8 mm 25...1016 mm
For Ø 10.2 mm 25...7620 mm
Weight (depends on Approx. 2 kg/m
length)
Housing material Aluminum
Flange material Stainless steel
Rod material Stainless steel
Rod wall thickness
For Ø 8 mm 0.9 mm
For Ø 10.2 mm 2 mm
Young's modulus Approx. 200 kN/mm
Housing mounting via M18×1.5 or 3/4"-16UNF
threads
Tightening torque Max. 100 Nm
7.6

Update rate and clock frequency

The maximum sampling frequency f
current value is available with each sampling, can be found
in the following graphic:
f in Hz
A,max
Fig. 7-1: Maximum sampling rate depending on the nominal length
www.balluff.com
2
, at which a new
A,max
Nominal length in mm
BTL7-...-KA_ _
Cable material PUR;
cULus 20549
80 °C, 300 V,
internal wiring
Cable temperature –40°C...+90°C
Cable diameter Max. 7 mm
Permissible bending
radius
Fixed routing ≥ 35 mm
Movable ≥ 105 mm
BTL7-...-FA_ _
Cable material PTFE
No UL approval available
Cable temperature –55°C...+200°C
Cable diameter Max. 7 mm
Permissible bending
radius
Fixed routing ≥ 35 mm
Movable No permissible bending
radius
The minimum sampling frequency f
(1) 1 magnet
(2) 2...16 magnets
is 62,5 Hz.
A,min
english 17