Personnel Qualification; Special Hazards - WIKA TC59-V Betriebsanleitung

2. Safety

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
EN
The activities described in these operating instructions may only be carried
■
out by skilled personnel who have the qualifications described below.
Keep unqualified personnel away from hazardous areas.
■
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowledge
of country-specific regulations, current standards and directives, are capable of carrying out
the work described and independently recognising potential hazards.
Special installation conditions require further appropriate knowledge, e.g. routing a sensor
within a furnace.

2.3 Special hazards

WARNING!
Non-observance of these instructions and their contents may result in the loss of
explosion protection.
WARNING!
Observe the information given in the applicable type examination certificate and
the relevant country-specific regulations for installation and use in hazardous
areas (e.g. IEC 60079-14, NEC, CEC). Non-observance can result in serious
injury and/or damage to equipment.
WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic gases or
liquids etc., in addition to all standard regulations, the appropriate existing codes
or regulations must also be followed.
6 WIKA operating instructions model TC59-V (V-PAD )
®