Warranty - Leister TRIAC ST Bedienungsanleitung

Warning
DANGER! Danger when opening up the tool, as live components and
connections are exposed. Therefore, before opening it, unplug the tool
to ensure disconnection from the mains. Before putting into operation,
Deutsch
check power supply cord and connector as well as extension cable for
English
electrical and mechanical damage.
Français
Español Incorrect use of the hand extruder (eg overheating of the material) can
Português
present a fi re and explosion hazard, especially near combus t ible
Italiano materials and explosive gases.
Nederland
Do not touch the element housing, air nozzle and discharging
Dansk
plastizised material when they are hot as they can cause burns.
Svenska
Let the tool cool down. Do not point the hot air flow and the
Norsk
discharg ing plastizised material in the direction of people or animals.
Suomi
Eλληνικά
Caution
Türkçe
Polski
The voltage rating stated on the tool must correspond to the mains
Magyar
voltage.
Česky
Slovensky For personal protection on building sites we strongly recommend
Românã the tool be connected to a RCCB (Residual Current Circuit Breaker).
Slovensko
The tool must be operated under supervision. Heat can ignite
Български
fl ammable materials which are not in view.The machine may only be
Eesti
used by qualifi ed specialists or under their supervision. Children
Lietuviu
are not authorized to use this machine.
Latviešu
Русский Protect tool from damp and wet.
日本語
Repairs should only be carried out by authorized Leister service
中文
points. Restricted to use with original Leister accessories and
‫ﻋﺮﺑﻲ‬
replacement parts.
8
Translation of the Original User Manual

Warranty

• For this tool, we generally provide a warranty in accordance with the statu-
tory / country-specifi c regulations from the date of purchase (verifi ed by invoice or
delivery document). Damage that has occurred will be corrected by replacement
or repair. Heating elements are excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded
from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by
the purchaser.
Konformität
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland,
confi rms that this product, in the version as brought into circulation through
us, fulfi ls the requirements of the following EC directives.
Directives:
Harmonized Standards: EN 14121-1, EN 55014-1, EN 55014-2,
Kaegiswil, 25.03.2013
Bruno von Wyl, CTO
Disposal
EC on waste electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected and sent
for recovery in an environmental-friendly manner.
2006/42, 2004/108, 2011/65
EN 61000-6-2, EN 62233, EN 61000-3-2,
EN 61000-3-3, EN 60335-2-45, EN 50581
Beat Mettler, COO
Power tools, accessories and packaging should be sorted for environmen
tal-friendly recycling. Only for EC countries: Do not dispose of power
tools into household waste! According to the European Directive 2002/96/