Remote Control And Functions - Klarstein 10031697 Handbuch

EN
22
6 When the hood is in ON mode, TIMER button is used for delay timer function.
Delay timer function allows you to set the hoods automatically power off
according to the delay timer you set from 1 minute to 60 minutes. Press TIMER
button once; it enters for delay timer setting and LCD shows [05:00]. Press
SPEED button once the number adds by 01. Continue pressing SPEED button;
it will display from [05:00]; [06:00]; until [60:00]. Press LIGHT button once;
the number reduces by 01. After setting delay timer you want; press TIMER
button to confirm. If you set delay timer as 05:00; the LCD display will show
from [05:00]; [04:59]... until [00:00]. When LCD shows [00:00]; the hood
will automatically power off and LCD display will only show 24-hour system
with blue backlight. After 30 seconds without operation; blue backlight will
disappear. But please note the Lamp is not under control of delay timer. Next
time; if you want to use delay timer function and you press TIMER button
without any change on time. The hood will automatically count time down from
your previous setting after 5 seconds.

REMOTE CONTROL AND FUNCTIONS

Press LIGHT button once, the light will be lit, press button again, the light will
be turned off. The lighting button is controlled separately and will not affect
that function by other buttons.
The motor has three speeds: Low, Medium, and High.
once, the motor starts to work at LOW speed. Press [+] button again, the
motor works at MEDIUM speed. Press [+] button at 3rd time, the motor works
at HIGH speed.
Press [-] button, the motor is adjusted to a lower position, and the LCD screen
displays that position in the meantime; if it is decreased continuously to none
position, then, it is the power off position (namely, the motor stops working).
Press TIMER button, it turns into the timer setting function, [+] button for time
rising and [-] button for time reducing. The timer setting process will be exited
automatically if no setting in 15 seconds, [+] button and [-] button will be
returned to motor speed setting function. Press TIMER button, it turns into the
timer setting function. The initial delay timer setting is 5 minutes, press [+]
button once, the timer setting will be rising by 1 minute and press [-] button
once, it will reducing by 1 minute, the time period for timer setting could
be from 1 minute to 60 minutes. After time is setting, press button again to
confirm, or if it will be confirmed automatically if no setting in 10 seconds.
Then the hood keeps working and will be power off automatically till the
setting time is finished. Next time if you want to use the timer function again
and you press button without any change on time period. The hood will
automatically count time down from your last setting after 10 seconds. If need
to change the time period, it have to reset the time as above. After the timer
setting is confirmed, the hood turns into working. Press button again, the hood
will exit the timer working process.
Press [+] button