Klarstein 10031697 Handbuch Seite 19

Exhaust pipe
Step 6
Unscrew the 8pcs machine silk from
the housing and rotate it to choose the
direction (1, 2, 3 or 4) of the outlet, then
screw the 8 pcs machine silk in order
to fix the housing well. Install the panel
decorative strip and filter well.
Step 7
Install the expansion pipe to the outlet.
Step 8
Open the two decorative plate to vertical,
use cross screwdriver to take off the 4 pcs
screws of lamp plate and switch panel,then
take them out.
EN
19