Herunterladen Inhalt Inhalt Diese Seite drucken

Before Using For The First Time; Cleaning - Silvercrest STYG 2000 A2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für STYG 2000 A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

RP85867 Teppan-Yaki-Grill LB6 Seite 7 Freitag, 16. November 2012 11:16 11
• Ensure that children cannot pull the
appliance down onto themselves with
the cable.
During manufacture, many parts are given a
thin film of protective oil. Before using the
appliance for the first time, heat it up without
any food so that any residues can
evaporate.
Note: When heating up for the first few
times a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance and all the
accessory parts out of the packaging.
2. Check that the appliance shows no signs
of damage.
3. Remove any labels or stickers (but not
the type plate on the underside).
4. Clean the appliance before using it for
the first time. Observe the information in
the chapter entitled "Cleaning" on
page 7.
5. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
Warning!
Allow the appliance to cool
down and pull out the mains
plug before cleaning.
Never immerse mains cable 1
and temperature regulator 3 in
liquids.
STYG 2000 A2
• Ensure that the packing foil does not

5. Before using for the first time

6. Turn the temperature regulator 3 to "0".
7. Plug the temperature regulator 3
8. Plug the mains plug into a suitable wall
9. Turn the temperature regulator 3 to "5".
10.Leave the appliance switched on until
11. Switch the appliance off by turning the
12. Pull out the mains plug and allow the
13.Wipe the grill plate 6 again with a

6. Cleaning

Note: drip tray 9 and grill plate 6 are
dishwasher-safe.
1. Take mains cable 1 and
2. Clean temperature regulator 3 with
become a deadly trap for a child.
Packing foils are not toys.
This switches the appliance off.
into the connecting socket 4.
socket (see "3. Technical data" on
page 3).
The indicator lamp 2 lights up and the
appliance heats up.
the indicator lamp 2 goes out.
temperature regulator 3 to "0".
appliance to cool down.
damp cloth. The appliance is now ready
to use.
temperature regulator 3 out of
connecting socket 4.
a clean, dry cloth. If necessary, you
7

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis