Safety Instructions - Becker Centronic VarioControl VC260 Montage- Und Betriebsanleitung

Caution
Always comply with regulations of local energy
▪
supply companies as well as VDE 100 provisions
for wet and damp rooms during installation.
Only use the control unit in dry rooms.
▪
Only use unmodified original parts from the con‐
▪
trol unit manufacturer.
Keep people out of the system's range of travel.
▪
Keep children away from control units.
▪
Observe all pertinent country-specific regula‐
▪
tions.
If the system is controlled by one or several appli‐
▪
ances, the system's range of travel must always
be visible during operation.
When connecting the control cables (protected
▪
extra-low voltages), only use cables with suffi‐
cient electrical strength.
Do not damage or scratch the solar panel.
▪
Never exert pressure on the photovoltaic cells.
▪
Never apply anything to the solar panel, e.g.
▪
paint.
22

Safety instructions