How To Use The Receiver; Installing The Batteries; Learning The Receiver Functions; Standard - Spectra Precision HR500 Bedienungsanleitung

How to Use the Receiver

Installing the Batteries

1. Turn the battery-housing knob
counterclockwise.
2. Pull up the knob to release the
battery-housing door.
3. Insert the battery as shown noting the
plus (+) and minus (–) diagram inside
the housing.
4. Put the battery-housing door in place
and turn the knob clockwise.

Learning the Receiver Functions

Standard

www.kreitel-vermessungsgeraete.de

Turning On/Off the Receiver

1. Press the power/audio button to turn
on the receiver.
Note: When the receiver is initially
turned on, all LCD symbols and
LEDs are turned on for 1 second
(diagnostic mode). After the diagnostic
mode is complete, all the symbols of
the last selected modes appear.
2. Press and hold the power/audio button
for 2 seconds to turn off the receiver.
4