Emc Declaration Of Conformity - Spectra Precision HR500 Bedienungsanleitung

EMC Declaration of Conformity

These receivers have been tested and found to comply with the limits for a Class B
digital device for radio noise for digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communication, and is pursuant to
part 15 of the Federal Communication Commission (FCC) rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. These receivers generate radio frequency. If it's not used in accordance with
the instructions, it may cause harmful interference to radio or television reception. Such
interference can be determined by turning the receiver off and on. You are encouraged
to try eliminating the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the laser and the receiver.
For more information, consult your dealer or an experience radio/television technician.
CAUTION: Changes or modifications to the receiver that are not expressly approved by
Trimble could void authority to use the equipment.
Declaration of Conformity
www.kreitel-vermessungsgeraete.de
Application of Council Directive(s):
Manufacturer's Name:
Manufacturer's Address:
European Representative Address:
Model Number:
Conformance to Directive(s):
Equipment Type/Environment:
Product Standards:
12
89/336/EEC
Trimble Navigation Ltd.
5475 Kellenburger Road
Dayton, Ohio 45424-1099 U.S.A.
Trimble Engineering and Construction GmbH
Am Prime Parc 11
D-65479 Raunheim, Germany
HR500/HR400
EC Directive 89/336/EEC using EN55022
and EN50082-1
ITE/residential, commercial & light industrial
Product meets the limit B and methods
of EN55022
Product meets the levels and methods of
IEC 801-2, 8 kV air, 4 kV contact
IEC 801-3, 3 V/m 26 to 1000 MHz 80%,
@ 1 kHz