Magnetic Mount - Spectra Precision HR500 Bedienungsanleitung

Magnetic Mount

The magnetic mount attaches to the receiver for use on machines or for special vertical
applications mounted to a tripod or a batter board.
1. Turn the battery-housing knob
counterclockwise to loosen the
battery-housing door.
2. Slide the receiver's groove onto the
mount's tongue until it stops at the
stop block.
3. Turn the battery-housing knob
www.kreitel-vermessungsgeraete.de
clockwise to hold the receiver securely
in place.
Note: The marking notches on both
sides of the receiver/magnetic mount
align with the on-grade portion of the
photocell and are used to mark vertical
position readings. The marking
notches are 50 mm (2 in.) from the
top of the receiver/magnetic mount.
5
Note: The /
8
with the on-grade portion of the
photocell and is used to mount the
receiver on a tripod or a batter board.
10
-11 tripod mount aligns