Siemens 7KG6106 Betriebsanleitung Seite 40

SIMEAS-T - Transducer with Auxiliary Power
Position of the balance potentionmeters
Transducer with a linear characteristic from 0 to A
End range value
Apply E = E ± 0.05 EN and calibrate with poti R33 to A = A
N
Check the intermediate values.
Transducer with a linear characteristic from 4 mA to 20 mA
4 mA
With only auxiliary power balance the input and calibrate the output
with poti R34 to A = 4 mA ± 0. % A
N
20mA
Apply E = E ± 0.05 E
N
Check the intermediate values.
Transducer with expanded end range and suppressed start range
Example: Transducer with the range 0 to 0.8 to . E
Start range value
Apply U = 0.8 U ± 0.05% U
E EN
an output value of A
End range value
Apply E = . E ± 0.05% E
N
an output end value of A
Check start and end values, repeat calibration if necessary
40
G3493-F 800-H
N
and calibrate with poti R33 to A = 0 mA ± 0.% A
N
and set poti R32 to
EN
= 0 A ± 0.% I .
N N AN
and calibrate with poti R33 to
N
= A ± 0.% I
N N AN.
R30 R3 R33 R34 R5
N
± 0. % A
N
~
= 0 to 0 to A
N
R3
.
N
.
N
N