Setting The Temperature - Dometic Waeco CoolFreeze CFX95DZ2 Bedienungsanleitung

CFX95DZ2
Latching the cooler lid
➤ Close the lids.
➤ Press the latches (fig. 2 1, page 2) down, until they latch in
place audibly.
I
NOTE – Lid Open Alarm
If a lid is left open for three minutes or more and the device is
switched on, the respective interior light will flash until the lid is
closed.
7.6

Setting the temperature

➤ Press the "SET" button (fig. 3 4, page 2):
– once for the large compartment
– twice for the small compartment
✓ The display of the respective compartment blinks.
➤ Use the "UP +" (fig. 3 10, page 2) and "DOWN –" (fig. 3 9, page 2)
buttons to select the cooling temperature.
You can adjust the cooling temperature so that each compartment works
as a refrigerator compartment or as a freezer compartment.
✓ The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is dis-
played again.
I
NOTE
The temperature of each compartment can be set to –22 °C. The
manufacturer however recommends a cooling temperature of
–15 °C to –18 °C for normal usage and optimum energy con-
sumption.
EN
Operation
41