Technical Specification - Velleman DVM439 Bedienungsanleitung

1.8.
•
The thermometer incorporates a visual low battery indication as follows
'Battery OK': measurements are possible
'Battery low': battery needs to be replaced, measurement still
possible
'Battery Exhausted': measurements no longer possible, replace
battery.
• To replace the battery, wait until the instrument powers off.
• Open the battery compartment by sliding the battery cover (3) downwards.
• Replace the battery with two new type AAA, 1.5V batteries.
• Close the battery compartment by sliding the battery cover back in place.
A malfunction may occur if the power is on when the battery is
replaced. If a malfunction occurs, restart the device.
Keep the battery away from children.
1.9.
measurement range
operating range
storage temperature
accuracy
(t = 23 ± 3 °C)
amb
resolution
response time (90%)
emissivity
display
wavelength
auto switching-off
distance-to-spot ratio
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of
this device.
For more info concerning this product, please visit our website
www.velleman.eu.
The information in this manual is subject to change without prior notice.
00 (30/06/2008)
Battery

Technical Specification

-35°C ~ +365°C (-31°F ~ +689°F)
0°C ~ +50°C (+32°F ~ +122°F)
-20°C ~ +65°C (-4°F ~ +149°F)
T = -35~0°C: ±(2.5°C+0.05/°C)
obj
T = 0~365°C: ± 2,5% of reading or 2,5°C (4,5°F)
obj
whichever is greater
0.2°C /0.5°F
1 sec
0.95 (fixed)
LCD
5 m - 14 m
15 sec
D:S = 8:1
2 x AAA, 1.5V battery (incl.)
172.9 x 36.0 x 71.5 mm
152 gr. (5.36 oz) (batteries included)
DVM439
:
- 6 -