System Setting - Xoro HRT 1500 Bedienungsanleitung

DVB FUNCTIONS
Function Setting

System setting

Consists of five sub-menus, select item of lower sub-
menus while pressing ▲ and ▼.
l
TV Standard
You can set the TV standard to
AUTO by pressing ▲ and ▼.
l
Display Type
Select the display type (16:9 or 4:3) according to the
TV screen which is connected. Select one item by
pressing ▲ and ▼.
l
Video Output
Consist of five items. Select a item of current menu
by press ▲ and ▼. Below you can see what outputs
are activated when you select a certain item:
u
S-Video : CVBS and S-video output.
u
SCART : CVBS and RGB SCART output.
u
YCbCr : CVBS and Interleaved component
output.
u
YPbPr : Progressive Scan component output
select.
u
VGA : Standard VGA signal output.
l
Regional Setting
Select your local region by pressing ▲ and ▼.
These settings are important for the device to work
correctly in TV mode as the DVB-T system varies
from country to country. If your country is not listed,
you should try other countries settings as they also
might work.
l
System Schedule
This enables you to activate your device at a certain
time. This is very useful if you want to record a TV
show with an external recorder connected to
SCART / VCR interface.
You can schedule 6 different time slots, for each slot
you can set Mode, Start Date, Start Time, End Time,
Channel Type and Channel No. When you have
entered all parameters, please active the slot by
pressing ▲ or ▼.
108
Main Menu
PAL/NTSC or
System Setting
TV Standard
Display Type
Video Output
Regional Setting
System Schedule