Herunterladen Inhalt Inhalt Diese Seite drucken

Silvercrest SSTB 10 A1 Bedienungsanleitung Seite 26

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Repairs to the device during the warranty period may only be carried out by
a customer service department authorised by the manufacturer. Otherwise
no warranty claims can be considered for subsequent damage.
Defective components must always be replaced with original replacement
parts. Compliance with safety requirements can only be guaranteed if original
replacement parts are used.
Use the device and the mains adapter only in dry rooms.
Protect the device from drips or splashes of water. Never submerge the
device in water, do not set up the device in the vicinity of water and do not
place any object fi lled with liquid (i.e. vases) on or next to the device.
Do not place any heavy objects on the device. The storage compartment is
used only for storage of connected playback devices.
Do not operate or place the device close to an open fl ame (e.g. candles).
Do not place any lit candles on the product.
Avoid exposing the device to direct sunlight.
If you move the device quickly from a warm to a cold room or vice versa,
allow the device at least 30 minutes to acclimatise.
Operate the device only with the supplied mains adapter.
To avoid damage caused by improper warming, do not cover the mains
power adapter.
The
the mains power supply. In addition, the mains adapter consumes power as
long as it is connected to the power socket (standby mode). To completely
disconnect the device from the power supply, the plug must be removed
from the mains power socket.
To disconnect the mains adapter, always pull only on the plug itself, not on
the power cable.
Never touch the mains adapter or the connecting cable with wet hands!
The mains power socket must be easily accessible so that the mains adapter
can be easily disconnected in an emergency.
In the case of a malfunction, unusual noises or smoke or a thunderstorm,
disconnect the mains adapter from the power socket.
SSTB 10 A1
button on this device does not completely disconnect the device from
GB
23

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis