Lincoln Electric LF-31 Bedienungsanleitung Seite 8

B. Recall Memory Welding Mode (CV Mode).
In this RECALL MEMORY welding mode you can weld with a saved memory. This choice is possible if at least one
Memory is used. (To save a memory go to the "MEM" menu.)
It is possible to lock this Recall memory welding mode with a four digit code. This function prevents the changing of
parameters saved in the memory.
See flow chart "Lock or Unlock Memory" on page 14.
a. BEFORE WELDING :
Display of the Memory Number
(1 to 10, Only "used" memories)
Choice of the "used" Memory
Number (1 to 10)
b. DURING WELDING :
These actual values are displayed for 5 seconds after the end of the weld.
Display of the Actual
Welding Current
Reminder of the WFS saved in the
memory (fix parameter)
In Amps
Display of the Welding Voltage Saved in the
memory
Display of the Actual
Welding Voltage
Correction of the saved Welding
Voltage (± 1 Volt)
Correction of the saved
Welding Voltage
(± 1 Volt)
In Volts
8