Lincoln Electric LF-31 Bedienungsanleitung Seite 14

This hidden menu allows you to change the Machine configuration :
To ENTER the set-up menu, press the SELECT pushbutton and SWITCH ON the machine.
Knob 1 :
Turn right or left
Choice of the configuration Choice
- LANGUAGE
- ACCELERATION
- PRODUCT TYPE
- SN
- MAINTENANCE
- CALIBRATION
- PROGRAM LEVEL
- RESET
- EXIT
Connection diagram
LF30/31
SET-UP Menu for LF31
Knob 2 :
Turn right or left
- English
- Français
- Nederlands
- Español
- From 1 to 3
Standard value 1
Not used
Not used
YES / NO
YES / NO
Not used
YES / NO
YES / NO
ON
OFF
Function
Select the language you want to use.
Value used to determine the acceleration of the
wire between the "Cold inch WFS" and the
"Welding WFS".
Shows Product Type LF30 or LF31
Shows Product Serial Number
Answer NO or contact Lincoln representative.
Answer NO
Shows Program level of the Wire Feeder.
If YES, you will :
- Erase all the memories and their status
will become "empty"
- Unlock the Recall memory mode if it was
locked
- Restore all the parameters to their "standard
value"
If YES, Press SELECT to Exit and save
the changes above.
14