Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Always unplug the bench grinder before changing a grinding wheel.
•
The maximum peripheral speed of the dry grinding wheel is: Ø 150 = 23 m/s.
The maximum peripheral speed of the wet grinding wheel is: Ø 200 = 1.3 m/s.
•
The maximum permissible motor housing temperature is 80 °C.
•
Fill the water container up to the spindle shaft.
•
Ensure that the bench grinder is securely fastened to a stable surface before use.
Use the four mounting holes in the base.
•
Adjust the spark deflector periodically to compensate for the wear of the wheel.
The distance between the spark deflector and the grinding wheel should be as little
as possible and should not exceed 2 mm.
•
The grinding wheel must be replaced at the latest when the spark deflector and
the workpiece support can no longer be set a maximum distance of 2 mm from
the grinding wheel.
•
Only use grinding wheels recommended by the manufacturer and that are rated at
the same or higher speed than the speed specified on the rating plate of the bench
grinder.
•
When the grinding wheels are blocked due to abnormal feed force or a jammed
workpiece during grinding, turn the machine off and disconnect it from the power
supply. Remove the workpiece and ensure that both grinding wheels run freely.
Turn the machine on and resume grinding with reduced feed force.
•
Do not grind materials containing asbestos. Asbestos is a known carcinogen.
•
Never use damaged or deformed wheels or brushes.
•
Avoid contact with the moving grinding wheel.
•
Hold the workpiece firmly with both hands at all times when working.
•
Keep your proper footing and balance at all times.
•
After you have finished grinding metal, allow the grinding wheel(s) to come to a standstill.
•
When taking a break from your work, before carrying out any tasks on the device
itself and when you are not using the machine, always pull the mains plug out of
the mains socket.
•
Handle the machine carefully and treat it with respect. Always keep the machine
clean, dry and free of oil or grease.
•
Remain alert at all times! Always watch what you are doing and proceed with
caution. Do not use the machine if you cannot concentrate or you are feeling unwell.
•
Store grinding wheels in such a way that they are not subject to mechanical loads
or damaging environmental influences.
Product safety symbols
Please read the entire instruction manual before using and save it for
future reference.
Always wear hearing protection.
Always wear safety glasses or a visor and breathing protection.
6
Werbung
Inhaltsverzeichnis
