Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display
Display flashing
Displayed continuously
Displayed continuously
Displayed continuously
• If the station still does not receive a signal, press and hold the
3 seconds to start the manual search for the DCF signal. The wireless symbol (12) will start
to flash.
Note – Time settings
• The search process takes about 3-10 minutes. If the search fails, it ends and is repeated
at the next clock hour.
• In the meantime you can, however, set the time and the date manually.
• The clock automatically continues to search for the DCF signal on a daily basis (00:00
a.m., 03:00 a.m., 06:00 a.m., 12:00 p.m.). If the signal is received successfully, the
manually-set time and date are overwritten.
• Press and hold the
8
/
– button (18) again for approx. 3 seconds to stop the manual search.
Searching for the DCF signal
Inactive – no signal reception in the last 24
Successful – signal is being received
Successful – strong signal
Active
hours
–button (18) for approx.
Werbung
Inhaltsverzeichnis
