Hama EWS-860 Bedienungsanleitung Seite 12

• Press the alarm button (21) repeatedly to also set the other alarm mode or return to the
time display (9).
• If you do not make an entry for 2 minutes, you automatically exit the setup mode.
Note – Alarm
• When activated, the weekday alarm only triggers an alarm on weekdays (Monday to
Friday). The alarm symbol (10)
• When activated, the once-only alarm only triggers an alarm once. The alarm symbol
(10) is displayed if this alarm is activated. This alarm is automatically deactivated
after the alarm has sounded.
• When activated and when the outside temperature is < 0°C/ 32°F, the early alarm
triggers an alarm 15, 30, 45, 60 or 90 minutes before the actual alarm (
). The alarm symbol (10)
• In the corresponding display, press the
deactivate the corresponding alarm.
The alarm symbol (10) will appear/not appear.
Note – Early alarm
The early alarm can only be activated if at least one of the two alarm functions (
has already been activated.
• If the alarm is triggered, the alarm symbol (10) will begin to flash and an alarm will sound.
• Press the alarm button (21) to stop the alarm. Otherwise, it will stop automatically after
2 minutes.
6.4. Weather
Note – Temperature mode
• Press the button (18) or the
flashing in the display.
Celsius/Fahrenheit
• In temperature mode, press and hold the mode button (20) for approx. 3 seconds to
switch the temperature display between °C and °F.
is displayed if this alarm is activated.
is displayed if this alarm is activated.
-button (18) or the -button (19) to activate/
button (19) repeatedly until the
and/or
/ )
symbol starts
11