Hama EWS-860 Bedienungsanleitung Seite 10

Manually setting the date/time
Note – TIME mode
• Press the button (18) or the
flashing in the display.
Note – Time and time zone
• In TIME mode, press the mode button (20) repeatedly to toggle between the following
different displays:
• Time with seconds display, time with weekday display, time adjusted according to time
zone with weekday display, time adjusted according to time zone with seconds display,
date
• The time zone symbol (13) is displayed when the time has been adjusted according to
the time zone.
• Press and hold the -button (18) for approx. 3 seconds to stop the search for the DCF
signal. The wireless symbol (12) goes out and you can set the time manually.
• In TIME mode, repeatedly press the mode button (20) until the time zone symbol (13) is
no longer displayed.
• Press and hold the mode button (20) for approx. 3 seconds to make the following settings
one after the other:
• Weekday (11)
• Year (9)
• Month (9)
• Day (9)
• D/M – M/D (9) display
• 12/24 hour format (9)
• Hours (9)
• Minutes (9)
• To select the individual values, press the -button (18) or the
each selection by pressing the mode button (20).
• If you do not make an entry for 2 minutes, you automatically exit the setup mode.
button (19) repeatedly until the symbol starts
-button (19) and confirm
9