Cavitron Touch™ Ultrasonic Scaler Description; System Controls - Cavitron touch Gebrauchsanweisung

SECTiON 8:
Cavitron Touch™ ultrasonic Scaler description

8.1 System Controls

Ultrasonic Power Level Control
Slide to select the desired ultrasonic power level for operation. Sliding up increases the
power level and sliding down decreases the power level.
Rinse
Rinse mode is for use during an ultrasonic scaling procedure when lavage is desired with
no cavitation (Page 8).
Purge
Purge mode is used to flush water lines. Runs automatically for 2 minutes (Page 8).
Settings Icon
Allows you to adjust
settings for the foot pedal
and screen brightness.
Press and hold until the
Settings screen appears.
Tap-On™ Wireless Rechargeable Foot Pedal
Eliminates the need to hold down or pump foot pedal.
See section 8.5 for more details.
Main Power ON/OFF Switch
ON/OFF Switch located located on the rear
of the system.
7
Diagnostic
Display
See section 8.2
for more details.
Handpiece Holder
Securely holds the
system's handpiece, or
cable connector when
handpiece is not installed.
Preset Power
Modes
Lock / Unlock
Press and hold to lock or
unlock the screen. Screen
will appear dimmed
when locked.
Detachable
Featherweight
Handpiece Cable
Cable can easily be
detached from unit as
needed for replacement.
Steri-Mate®
360 Handpiece
Accepts all Cavitron® 30K™ Ultrasonic
inserts. See section 8.3 for more details.