Cleaning And Maintenance; Technical Specifications - Omnitronic EM-640 Bedienungsanleitung

7. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers. Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

8. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Inputs:
Microphone 1, 2
Minimum input voltage:
Line 1 to 6:
Minimum input voltage:
PHONO 1, 2:
Minimum input voltage:
Outputs:
Master 1 to 3:
Output voltage:
Record:
Output voltage:
Headphones:
Master tone control:
3 x high:
3 x mid:
3 x low:
Microphone tone control:
2 x high:
2 x low:
Talkover attenuation:
S/N ratio:
Frequency range:
Distortion:
Dimensions (WxHxD):
Weight:
Please note: Every information is subject to change without prior notice. 28.12.2010 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
via supplied power unit
35 W
combined 3-pin XLR/6.3 mm jack (bal.)
1 mV RMS
stereo RCA
150 mV RMS
stereo RCA
3 mV RMS
stereo RCA, stereo XLR (3-pin)
0.75 V RMS
stereo RCA
0.75 V RMS
6.3 mm stereo jack (S 8 )
-12 dB to +12 dB/ 10 kHz
-12 dB to +12 dB/ 1 kHz
-12 dB to +12 dB/ 100 Hz
-12 dB to +12 dB/ 10 kHz
-12 dB to +12 dB/ 100 Hz
-15 dB
>65 dB
20-20,000 Hz
0.03 %
483 x 178 x 110 mm (19", 4 U)
3.2 kg
20/20 00057015.DOC, Version 1.0