Cleaning And Maintenance; Technical Specifications - Omnitronic EM-312 Bedienungsanleitung

6 Cleaning and Maintenance

Disconnect from mains before starting maintenance operation! We recommend a frequent cleaning of the
device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before
replacing the fuse, unplug mains lead.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer.
Should you have further questions, please contact your dealer.

7 Technical Specifications

Power supply:
Power consumption:
Inputs:
Mic/line (mono):
Line (stereo):
Impedance:
Max. input level:
Frequency range:
S/N ratio:
THD:
Phantom power:
Tone control:
Treble:
Middle:
Bass:
Outputs:
Line (stereo):
Line (mono):
Mic (mono):
Impedance:
Max. output level:
Dimensions (L x W x H):
Weight:
Specifications are subject to change without notice due to product improvements.
EM-312
230 V AC, 50 Hz or 24 V DC
12 W
combination XLR/6.3 mm jack, balanced
RCA
1.4 kohms (mic/line), 10 kohms (line)
-19 dBu (mic), +21dBu (line)
20-22000 Hz
103 dB
0.03 %
+18-21 V, switchable
±15 dB at 12 kHz
±12 dB at 2.5 Hz
±15 dB at 80 Hz
XLR, balanced and RCA
6.3 mm jack, unbalanced
6.3 mm jack, unbalanced
120 ohms
+21 dBu
483 x 230 x 44 mm
3 kg
15 • EN