Cleaning And Maintenance - Omnitronic HRS-1002 Bedienungsanleitung

6.1 Occupation balanced XLR-connection:
Balanced use with XLR connectors
2 1
1 = Ground / Shield
2 = Hot (+)
3 = Cold (-)
3
Input
For unbalanced use pin 1 and pin 3 have to be bridged
6.2 Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp

7. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
1 2
3
Output
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+)
Ring =
cold (-)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
6.3 Occupation stereo plug for
headphone connection:
Balanced use of
stereo 1/4" jack plugs
Tip =
Left
Ring =
Right
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
23/24 10040204_V_1_0.DOC