Adjusting The Light Time (Time); Adjusting The Sensor Sensitivity (Sens); Adjusting The Light Sensitivity (Lux) - LIVARNOLUX LLS 06 A1 Bedienungsanleitung Und Serviceinformationen

LED spotlight LLS 06 A1
 You can align the movement sensor [6] horizontally by twisting it.
 To align the movement sensor [6] vertically, you need to loosen the fixing screw [5] first. Once the
movement sensor [6] is in the desired position, tighten the fixing screw [5] again.

Adjusting the light time (TIME)

You can adjust the light time using the TIME controller [9] on the underside of the movement sensor [6]
(approx. 10 s to 4 min). Turn the TIME controller [9] clockwise to increase the light time and anticlockwise
to reduce the light time.

Adjusting the sensor sensitivity (SENS)

You can adjust the sensor sensitivity using the SENS controller [10] on the underside of the movement
sensor [6]. Turn the SENS controller [10] clockwise to increase the sensitivity and anticlockwise to reduce
the sensitivity. The higher the sensitivity, the larger the recording range.

Adjusting the light sensitivity (LUX)

You can adjust the light sensitivity using the LUX controller [11] on the underside of the movement sensor
[6]. This allows you to define the light conditions in which the movement sensor reacts and the LED
spotlight switches on.
Turn the LUX controller [11] clockwise (direction ) if you wish the movement sensor to react in relatively
bright light conditions.
Turn the LUX controller [11] anticlockwise (direction ) if you wish the movement sensor to react in
relatively poor light conditions.
English - 25