Description Of The Device; Features; Installation; Overhead Rigging - EuroLite LED MF-100 Bedienungsanleitung

DESCRIPTION OF THE DEVICE

Features

RGBAW flower effect with 3 W LEDs
• Equipped with 5 x 3 W LED: 1 x red, 1 x green, 1 x blue, 1 x amber and 1 x white
• Available in three different models (flowereffekt with/without mirror, barrel effect)
• Functions: Static colors, colored beams in R, G, B, A and W, color change, color fade, strobe settings and
motor-steps via DMX, Master/Slave
• DMX-controlled operation or stand-alone operation with Master/Slave function
• DMX512 control possible via any commercial DMX controller
• Comfortable addressing and setting via control panel with LED display and four operating buttons
• Sound-control via built-in microphone
• Microphone-sensitivity adjustable
• Manual focus
• Fuzzy sound control: program continues automatically during periods without music or bass-beat
• Easy installation

INSTALLATION

Overhead rigging

Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The device should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the installation yourself,
but instead use a professional structural rigger. Improper installation can result in bodily injury and or
damage to property.
The device has to be installed out of the reach of people.
DANGER TO LIFE!
16/22 00063008.DOC, Version 1.0