E) Slideshow Repetition; Display Format; G) Automatic On Or Off; H) Brightness - Conrad W232 Bedienungsanleitung

e) Slide show repetition
Select here whether the images shall be shown in the sequence of the file names or in a random sequence during
the slideshow. You may also select a manual control.

For the selection of the manual control you have to change the images in the photo mode using the
arrow keys " " or " "; there is no automatic slideshow. You can chose this setting if you wish to display
a certain image for a longer time (e.g. a wedding photo or the like).
This is not possible for the combined or the calendar mode. If the manual control is selected, the images
in the combined mode and calendar mode will be shown in the sequence of the file names.
Select the settings with the keys " " or " " and confirm them with the "ENTER" button.
f) Display format
Since there are different image formats, the display can be set in this setting function. Depending on the setting, the
image is cut at the edges (with images that are too wide or high) or small images (smaller than display resolution of
800x480) are enlarged.
Select the settings with the keys " " or " " and confirm them with the "ENTER" button.
g) Automatic switching on or off
You may define two time frames where the product turns itself on or off in order to save energy.
For example, the two time frames could be programmed so that the device turns on at 07.00 am in the first time frame,
and turns off at 08.15 am. For the second time frame, it turns on at 05.20 pm and off at 09.45 pm.

Pay attention that the time frames do not overlap (turning off time of the first time frame is within the
second time frame) and that the switching off time is "after" the turning on time.
Select the hours and minutes and if the function is turned on or off using the keys " " or " ". Change the value marked
in colours in the display using the keys " " or " ". Confirm the setting with the "ENTER" button.

Of course, independently of this, the weather station can be turned on or off manually using the "
button.

h) Brightness

In this function you can set the desired brightness for the display.
Change the settings with the keys " " or " ". Confirm the setting with the "ENTER" key; the setting will be saved
and the brightness of the display changed.

i) Contrast

In this function you can set the desired contrast for the display.
Change the settings with the keys " " or " ". Confirm the setting with the "ENTER" key; the setting will be saved
and the contrast of the display changed.
54
"