The Answering Machine; Selecting A Male Or Female Voice For The Standard Greeting; Recording, Changing And Deleting A Greeting Message - AUDIOLINE TAB938 Bedienungsanleitung

8

The answering machine

For your greeting message you can either use the standard greeting delivered by
a professional male or female radio speaker or you can record your own greeting
with a length of up to 60 seconds. If you have not recorded your own greeting,
the answering machine will reply with the standard greeting.
8.1 Selecting a male or female voice for the standard
greeting
1. Press the MENU
the Jogdial.
2. Then press the
3. Use the Jogdial to select the required setting MAENNERSTIMME
FRAUENSTIMME.
4. Confirm with
selected voice.
8.2

Recording, changing and deleting a greeting message

Example of your own greeting: "Hallo, this is 05432/1234. I am sorry but we
are not available to take your call at the moment. However, you can leave a
message if you wish. Please speak after the tone."
Wording of the standard greeting (German): "Hallo, bitte hinterlassen Sie
Ihre Nachricht nach dem Ton."(Hallo, please leave your message after the tone.)
Before recording your greeting, you should write down the text that you want to
record. The length of your own greeting must be at least 3 seconds and may not
exceed 60 seconds. The longer your greeting lasts, the less recording time will be
available for incoming messages. The maximum recording time is ca. 14 minutes.
If your greeting lasts 20 seconds for example, there will be 13 minutes and 40
seconds remaining for incoming calls.
Recording your own greeting
1. Press the MENU
2. Use the Jogdial to select the setting ANSAGE AUFNEHMEN and press and
hold the
ENTER
3. Start your greeting directly after the signal tone. While recording, keep at a
distance of ca. 15 cm from the answering machine so that you can speak
easily into the microphone on the upper side.
4. Release the
The greeting will now be repeated automatically. The volume can be adjusted by
repeatedly pressing the two arrow keys
- The answering machine -
button and select the STANDARD ANSAGE setting using
button.
ENTER
and you will hear the standard greeting with the
ENTER
button. The display shows the message LCD KONTRAST.
button.
button after you have finished your greeting message.
ENTER
and .
47