Setting The Clock - AUDIOLINE BigTel 48 Bedienungsanleitung

3.6 T−NET set up
Your AUDIOLINE Telephone BIGTEL 48 supports the most important
DEUTSCHE TELEKOM added value functions (e.g. brokering, call wai-
ting, three−way conference, etc.). For these, you will need the "FLASH"
setting on your telephone. More information can be found in item 4. Please
contact DEUTSCHE TELEKOM to gain access to these functions (some of
which are subject to charge).
3.7

Setting the clock

The present time is shown in the display. To set the clock, please proceed
as follows:
1. Press the SET button beneath the display once. The hours figure in
the display starts to flash.
2. You can now enter the present time using the +/− button. To do this,
press the +/− button until you see the present hour in the display.
3. Now press the SET button again and the minutes figure in the display
starts to flash.
4. You can now enter the present number of minutes by repeatedly
pressing the +/− button.
5. The setting of the time is completed by pressing the SET button.
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
Installation
17