Handling And Operation; Height Adjustment Of The Plate Brushes; Height Adjustment Of The Push Bar - FLORABEST FKM 2400 A1 Bedienungsanleitung

GB
IE

Handling and operation

Height adjustment of the plate brushes

Height adjustment of the push bar

8
Step 5
♦ Insert the collecting container
By pushing the sweeper the plate brushes
rotatation via belt drives. The rotating plate brushes
middle. The dirt is then lifted up by the two sweeping brushes and carried into
the collecting container
Depending on the application and wear and tear, the plate brushes
steplessly adjusted in their operating height.
To do this, turn the adjustment screw
resp. to the left to lower the plate brushes
The push bar can be adjusted in three stages, to the heights of approx. 99 -
95 - 90 cm.
Remove the lock nuts
Select the one pair of the 3 sets of holes on the push handle upper element
best suited to your needs and then rescrew the push bar fi rmly together with the
lock nuts and the mounting screws
into the sweeper.
5
and sweeping brushes are set into
3
.
5
to the right to raise the plate brushes
4
.
3
and associated mounting screws
.
5
sweep the dirt to the
3
can be
3
.
FKM 2400 A1
,
3