Operation; Electrical Diagram - h.koenig HF320 Bedienungsanleitung

Step 10. After the operation is over, turn off the machine first, and then pull the removable bowl out.

OPERATION :

Keep cool function
After the ice cream is finished the machine will automatically start up the keep cool function, which can
keep the ice cream cool for ten minutes. Ten minutes later, the machine will enter standby state.
Motor self-protection function
When the ice cream hardens, the mixing motor might be blocked. The motor protection device makes
the mixing motor stop working by detecting its temperature to ensure the life of the motor.
Controlling the Volume of the Ingredients
To avoid overflow and waste, please make sure that the ingredients do not exceed 60% of the
capacity of the removable bowl (Ice cream expands when being formed)
The Differences Among The Three Working Modes
1. Ice cream mode: the default working time is 60 minutes. The detailed operation is instructed as
above.
2. Cooling only mode, the default working time is 30 minutes. The operation is similar with that of ice
cream mode, but there isn't a mixing function.
3. Mixing only mode, the default working time is 10 minutes. The operation is similar with that of ice
cream mode, but there isn't freezing function.
Storage of ice cream
Remove finished ice cream into another container using a plastic scoop or a wooden spoon, do not
use a metal scoop avoiding scratch on the inside removable bowl.

ELECTRICAL DIAGRAM :

Page 5 of 13