Control Panel Operation - h.koenig KB20 Bedienungsanleitung

FEATURE:
² Removable ice basket is included
² Big transparent full-view window. ice making process is visible through this special window
² Easy-use control design .Two ice sizes is optional. Self-indicator of full ice & water shortage is
included
CONTROL PANEL OPERATION ：
The indicator of POWER will flash after plugged in, and then the machine enters standby
state. It will start to work by pressing POWER button, accompanying indicator lighting.
During operation, pressing this button, the machine will return to standby state.
This button is for selecting the size of ice. The default setting is large ice, if the small one is
needed, pressing this button is available. When you select the desired size, corresponding
indicator of S (small) or L (large) will be on.
Press and hold "SELECT" button for 3 seconds to activate pipeline self-clean process,
which takes "pump water in for 30 seconds---water tank run to drain out water" as a circle,
and this circle will run for 5 times. Flashing of indicators of "S" and "L" will take place in turn
until self-clean process is over and the machine enters standby mode. Take away the plastic
plug to drain water and then whole process is finished.
When the indicator of this button turns to red, it means insufficient water to water reservoir,
you need to add enough water and press POWER button to restart the machine.
When the ice reach to the max storage capacity, the indicator of this button will flash, and
the machine will stop working. What you need to do is pouring out the ice, if the position of
ice is lower than the position of ice bin full sensor, the machine will restart automatically.