Werbung
FM
REMOTE CONTROL UNIT
ATTENTION
When unit with handset is master, settings are automatically sent
to slaves.
Use "Swing" is not applicable.
Adjust Set Temperature
Press down or up button to decrease or
increase the desired room temperature.
Note: Temperature con not be set in Fan
mode.
Mode
Press this button to advance the mode in the
following sequence:
Cool => Dry => Fan => Heat => Auto
Cool Heat (both Cool and Heat symbol light
up)
Fan
Press this button to advance the fan speed
as follows:
Auto => Low => Medium => High
Under Fan mode, only low, medium and high
are available
Under Dry mode, fan speed will be inhibited
and will not be displayed.
On Timer
First press shows the last timer setting.
Subsequent pressing will change the timer
setting in 1 minute intervals. Hold down
the On button continuously to increase the
updating speed.
Cancel Timer
Press this button to cancel all timer settings.
FC66003653 - Rev 00
È severamente vietata la riproduzione anche parziale di questo manuale.
Cool
Dry
Fan
/
All copying, even partial, of this manual is strictly forbidden.
Heat
Signal
Fan Speed
Sleep
Louver
Timer on/off
Sleep
Press to activate the emergency Sleep
function which automatically adjust the
temperature to provide a more comfortable
sleep, ie for use in bedroom.
On/Off
Press to switch on or off the air conditioner.
Louver
Press this button to change louver angle to a
fixed position 1, 2, 3, 4, auto sweep or stop.
Swing
Press this button to turn on or off swing
function.
Clock
Press down or up for 2 seconds to acticate.
The current clock setting will decrease or
increase at 1 minute intervals on each press.
The speed of interval updating increase after
4 seconds of continuous key press. It will
update at high speed after 6 seconds of
continuous key press.
Off Timer
First press shows the last timer setting.
Subsequent pressing will change the timer
setting in 1 minute intervals. Hold down
the Off button continuously to increase the
updating speed.
25
Werbung
Kapitel
