Product Description - GUTMANN Noche Bedienungsanleitung

en
The metal filters are held behind a safety
glass panel by means of magnets. The
filters and the interior of the hood are easily
accessible for cleaning purposes by folding
down the safety glass panel.
The extraction capacity is controlled via the
slider control panel. Apart from the LED
lighting, additional functions of some hoods
are also controlled via the control panel.
The illumination of the cooking area is
provided by power-saving LED lights
positioned at the edges of the hood. For
reasons of hygiene, the extractor hood is
made from stainless steel and safety glass
elements.
1 Hood body
2 Upper tower
3 Lower tower
4 SLIDER panel control element
5 Foldable safety glass panel
6 Contact magnet
7 Metal filter
8 LED lighting

Product description

Slider panel control element
The slider panel control element
consists of 4 control panels.
Automatic
STOP fan
follow-up time
motor off
Fan power
Fan power
Touch any field to switch on. The lit field is
touched again to switch off.
The fan power is shown in the left control
symbol. Press your finger onto the symbol
area and slowly push to the right = fan po-
wer is increased. All LED bars are lit = in-
tensive level (switches back by one level
after approx. 5 minute)
The more LED bars are lit, the higher the
fan power. Press the LED bar to the left by
touch = the fan power is reduced. Push the
LED bar completely to the left = fan motor
off (LED bar no longer lit).
Automatic follow-up time
By touching the field with the follow-up time
symbol (2nd symbol form the left), the
automatic follow-up time is activated and
the follow-up time symbol lights up. The
extractor hood switches back from level 3
to level 1and runs for approx. ~15 min. there
before switching off.
Lighting
Touch the field with the lighting symbol to
switch on the lighting. The lighting is
switched off by touching again. Touch the
lighting symbol for a longer time = lighting
is dimmed
grease filter
cleaning
intensive level