Dick SM-100 Originalbetriebsanleitung Seite 68

Servicing and maintenance
9
1 Undo the fastening screws [1] of the cover [2],
2 Remove the cover [2],
3 Undo the fastening nuts [3] of the flange cover [4],
4 Remove the flange cover [4],
5 Replace the polishing wheel [5],
6 Install the individual parts in the reverse order.
After finishing all repairs and servicing work, check that all dis-
mantled parts have been completely and correctly installed,
especially the covers.
SM-100 belt grinder
32