Function; Covers - Dick SM-100 Originalbetriebsanleitung

Structure and function
6.3

Function

The belt grinder consists of two functional groups: A grinding arm
[1] with the grinding belt [2] and a polishing station [8] with the
polishing wheel [9]. The polishing station is mounted on the left
and the grinding arm is mounted on the right of the drive motor [4].
The drive motor sits on a base [6]. The switch [5] and the four
machine bases [7] are fixed to the base. The specified direction of
rotation for the polishing wheel [10] and the grinding belt [3] is
marked on the belt grinder.
6.4

Covers

Figure 6.2 – Covering danger zones
[1] Deflection plate
[2] Left-hand side panel of the grinding arm
[3] Right-hand side panel of the grinding arm
[4] Front cover of the grinding belt
[5] Left-hand side panel of the polishing wheel
[6] Cover of the polishing wheel
2
1
6
5
3
4
SM-100 belt grinder
6
15